Electrolux Dryer Lint Filter Gasket Reinstalled in Sunol

Location: Sunol, CA

Appliance: Electrolux electric dryer, model EIMED60LT3, serial 4D41410680

Replacement parts used: The original lint-filter housing gasket was cleaned and reseated. No new replacement part or part number was required.

Customer complaint: The gasket had come out of the dryer near the lint-filter housing.

Diagnosis: The lint-filter housing gasket had slipped out of its mounting channel. The surrounding duct and housing also contained lint and dust that needed to be removed before reassembly.

Cause: The gasket was no longer seated evenly around the lint-filter duct opening, leaving part of the seal exposed.

Repair completed: We opened the lint-filter housing section, cleaned lint and dust from the accessible duct area, positioned the original gasket back in its channel, secured the housing with four fasteners, and reassembled the dryer.

Result: The gasket remained securely in place and the Electrolux dryer operated normally during the final test.

Electrolux dryer gasket came loose in Sunol

The customer in Sunol called after a gasket came out of the dryer near the lint-filter opening. A loose seal in this area should be corrected before continued use because the lint-filter housing is part of the dryer's airflow path.

Inspection confirmed that the original gasket had moved out of its mounting channel. It was still serviceable, so a replacement part was not required. The correct repair was to open the housing, clean the mounting area, and reinstall the gasket evenly.

What the lint-filter housing gasket does

The gasket seals the lint-filter housing to the surrounding dryer duct. It helps keep airflow moving through the intended path and prevents lint from escaping through gaps around the housing.

When the gasket moves out of position, simply pushing the visible edge back may not seat the full seal correctly. The housing needs to be opened so the gasket channel, duct opening, and fastener points can be inspected.

Gasket reseating and lint cleaning

We removed the lint-filter housing section to reach the displaced gasket. The accessible lint and dust were vacuumed and wiped away so debris would not remain beneath the seal or interfere with reassembly.

The original gasket was placed back into its mounting channel and aligned around the duct opening. We then returned the housing to position, tightened all four fasteners, and confirmed that the gasket remained evenly captured around the opening.

Electrolux EIMED60LT3 model information

The appliance label identifies this unit as an Electrolux electric clothes dryer, model EIMED60LT3, serial 4D41410680. No replacement-part number is listed for this case because the existing gasket was intact and successfully reinstalled.

Final dryer test

After the gasket and lint-filter housing were secured, we reassembled the dryer and ran a final operation check. The appliance operated normally, the housing stayed secure, and the gasket did not move out of position.

Dryer repair service for Sunol

24FAR provides gas and electric dryer repair service and appliance repair for Sunol and surrounding communities. Customers nearby can also review our Fremont dryer repair and Pleasanton dryer repair service pages.

If a dryer gasket, lint-filter housing, or duct component comes loose, stop forcing the part and schedule an inspection. Book repair online or call (510) 999-6091.